AOIP CALYS 1000 Table documented multifunction calibrator
Specifications
| CALYS 1000 is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. | |
| Suitable for all field and lab measurements, it can simultaneously measure, generate and record over two isolated channels various signals of temperature, pressure, resistance, process and frequency in one single instrument. | |
| Providing extended functionalities (temperature simulation, scaling, steps, synthesizer, statistical functions, user-programmable configurations…), CALYS 1000 makes advanced data exploitation and full data traceability easier, as well as quick access to functions by menus. | |
| The instrument simultaneously measures and simulates: | Temperature: Up to 0,014% RDG |
| Resistance: Up to 0,012% RDG, 4 kΩ range | |
| Current: Up to 0,0175% RDG, 50 mA range + 24 V loop supply | |
| Voltage: Up to 0,013% RDG, 50 V range | |
| Frequency: Up to 0,005% RDG, 20 kHz range (10 kHz in simulation) | |
| Pressure: with an external pressure module (ref. ACL433) (comparison calibration with a pressure pump). |
| Using this user-friendly instrument, calibration tasks can be quickly carried out over the whole process chain. Take the documenting process calibrator to the field with you during the whole week with 10 calibration procedures stored in the device. | |
| Run the procedure after connecting the probes to the instrument and save the results for onsite easy and quick calibration. Back to the office, you can then upload the data on a computer in order to issue customized calibration certificates with dedicated calibration software DATACAL |
| RTD sensors | Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, Cu10 or Cu50 |
| Thermocouples | K, T. J, E, R, S, U, B, L, C and N |
| Pressure (with external sensor) | 0-1000 bar (absolute) |
| 0-30 bar (relative) | |
| DC current | 0-50mA |
| DC current emission | 0-24mA |
| DC voltage | 100mV-50V |
| DC voltage emission | 100mV-50V |
| Resistance | 400-4000 Ohm |
| Resitance emission | 40-4000 Ohm |
| Frequency | 20kHz |
| Frequency emission | 1000Hz-10kHz |
| Size | 340 x 320 x 160 mm (L x W x h) |
| Weight | 4.6 Kg |
| Display | 240 x 320 pixel liquid crystal graphical display with backlite & contrast control Display of result as table of values or trend curve |
| Power supply | 230 V ±10 %, 50/60 Hz |
| Battery | Type: Lithium-Ion, Charging time: 3 hours, Lifetime: 8 hours |
| Communication ports | USB |
| Reference range | 23°C ±5°C (RH: 45 to 75 % w/o condensing) |
| Operating reference range | -10 to 50°C (RH: 20 to 80 % w/o condensing) |
| Limit operating range | -15°C to +55°C (RH: 10 to 80 % w/o condensing) (70 % at 55°C) |
| Storage temperature limits | -30°C to +60°C |
| Maximum height | 0 to 2000 m |
| IP protection | IP54 according to EN 60529 |
Customisation possibilities
You can remark the customisation in your quote
| Productcode | |
|---|---|
| … |