FT 3080
FT 3080 Flanged thermowell – stepped
Specifications
| Design | Drilled bar stock with welded process flange |
| Materials | SS 316 - (Wst 1.4401) standard |
| Diameter | 25mm below flange, 13mm over 50mm at the tip |
| Bore | 6.6 mm |
| Bottom thickness | 5 mm |
| Female connection | 1/2"NPT, 1/2"BSP, M20x1.5 or other threads possible |
| Flange facing | Flat Face, Raised Face, Ring Type Joint, Tongue Face, or Groove Face |
| Standards | ASME B16.5, DIN 2526/2527, or EN 1092-1 |
| Flange weld | Full Penetration, partial penetration, or |
| screwed flange seal welded |
| Insertion length "U" | To specify |
| Lagging "X" | To specify, standard 60mm |
| Flange size | To specify |
| Flange rating | To specify |
| Flange facing | To specify |
| Other materials and dimensions | |
| Fully machined from bar, no weldings | |
| Protective coating, PTFE, Halar, Stellite etc. | |
| Tagging | |
| Wake frequency calculation |
Customisation possibilities
You can remark the customisation in your quote
| Productcode | FT 3080 |
|---|---|
| "U" length in mm | … |
| "X" length in mm | … |
| Flange size | … |
| Flange rating | … |
| Flange facing (RF, RTJ, etc.) | … |