PR 7501
PR 7501 Field mounted HART temperature transmitter with display
Specifications
| RTD, TC, Ohm, and bipolar mV input and analog output | |
| High definition local operator interface (LOI) with 3 optical buttons | |
| Selectable red or white backlight | |
| Ex d explosion proof / flame proof in aluminum or 316 stainless steel version | |
| HART 7 functionality with HART 5 compatibility |
| Monitoring, programming and diagnostics view | |
| Extensive diagnostics with flashing red or white backlight | |
| Supports 7 languages |
| 3 optical buttons; up, down and enter | |
| Dynamically adaptive to wear or accumulation of dirt | |
| Immune to interference from ambient light sources | |
| Useable with or without gloves |
| From the LOI through PR guided menu | |
| PReset and HART modem | |
| HHC, DCS or AMS via HART |
| For installation in zone 0, 1, 2 and zone 20, 21, 22 and in Class 1, Division 1 and 2 applications | |
| Hardware assessed for use in SIL applications | |
| Mounting on 1.5”–2” pipe bracket or on wall / bulkhead |
| Linearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100 | |
| HART communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors | |
| Conversion of linear resistance to a standard analog current signal, e.g from valves or Ohmic level sensors | |
| Amplification of bipolar mV signals to standard 4...20 mA current signals | |
| Up to 63 transmitters (HART 7) can be connected in a multidrop communication setup |
| NAMUR NE43 and NE89 | |
| HART protocol revision can be changed by user configuration to either HART 5 or HART 7 protocol |
Customisation possibilities
You can remark the customisation in your quote
| Productcode | PR 7501 |
|---|---|
| … |