FT 3270
FT 3270 Flanged thermowell with Helical strikes
Specifications
| Design | Machined and drilled from bar stock with machined spiral finish. Reduces vibration and gives a better temperature reading with smaller tip diameters. |
| Final design according to: | |
| ASME PTC19.3 TW2016 | |
| ASME Report nov. 2011, vol. 133/041102 | |
| Materials | SS316, SS310, SS321(H), SS347(H), Monel 400, Inconel 600, Hastelloy C276, Other materials possible |
| Diameter | Standard diameter 22 mm, or to be specified |
| Bore | 6.6mm standard, other diameters possible |
| Bottom thickness | 5.0mm standard, other thicknesses possible |
| Instrument connection | 1/2" NPT, 3/4" NPT, 1/2" BSP, M20x1.5 or other threads possible |
| Flange Facing | Flat Face, Raised Face, Ring Type Joint, Tongue Face, or Groove Face |
| Flange weld | Full penetration, partial penetration or screwed flange seal welded barstock |
| Standards | ASME B16.5, DIN 2526/2527, or EN 1092-1 |
| Insertion length | To specify |
| Lagging | To specify, standard 60mm |
| Flange size | To specify |
| Flange rating | To specify |
| Flange facing | To specify |
| Radiographic test (X-ray) | |
Customisation possibilities
You can remark the customisation in your quote
| Productcode | FT 3270 |
|---|---|
| "U" LENGTH IN MM | … |
| "X" LENGTH IN MM | … |
| HELICAL LENGTH IN MM | … |
| Flange size | … |
| Flange rating | … |
| Flange facing | … |
| Material | … |