test topfoto test topfoto red-flame Rafinaderij thermokoppel test topfoto
  •  

    5331A Universal temperature transmitter

     

    More info
  •  

    E81 All pairs and overall screened thermocouple extension cable -30°C to 85°C

     

    More info
  •  

    Calibration Bath LCA50, Range +30°C to +225°C

     

    More info
  •  

    CMC-141 Multicon Panel Mount Recorder Controller 144x144mm

    The Multicon CMC are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. e.g. 16 RTD ot 31 TC signals. MultiCon CMC-141 is CMC-99's bigger brother. It has all features included in CMC-99, but in addition it has a bigger display, more inputs/outputs and even more logic channels. Casing depth is still only 100 mm. Thanks to that it is one of the first industrial devices which integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. Based on Linux firmware, is stable and the touch screen makes configuration easy and comfortable and data presentation also readable and attractive. Although the Multicon CMC-141 is build in a quite small housing, it can integrate up to 72 inputs, and its construction allows user almost free configuration by choosing up to 3 from 30 available input/output modules. The device can simultanously record all build-in logical channels, and is capable to record data with maximum speed 10Hz (ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over 2 months (125 000 000 samples in total!). An operator can download stored data using a USB flash disk or via Ethernet.

    More info
  •  

    CONAX PG Single sensor feedthrough

     

    More info

Products

 

FT 3080 Flanged thermowell - stepped

Thermowell

DesignDrilled bar stock with welded process flange
MaterialsSS 316 - (Wst 1.4401) standard

Stem / Shaft

Diameter25mm below flange, 13mm over 50mm at the tip
Bore 6.6 mm
Bottom thickness5 mm
Female connection1/2" NPT

Flange

Flange facingFlat Face, Raised Face, Ring Type Joint, Tongue Face, or Groove Face
StandardsASME B16.5, DIN 2526/2527, or EN 1092-1
Flange weldFull Penetration, partial penetration, or
screwed flange seal welded

Dimensions

Insertion length "U"To specify
Lagging "X"To specify, standard 60mm
Flange size To specify
Flange ratingTo specify
Flange facingTo specify

Options

Other materials and dimensions
Fully machined from bar, no weldings
Protective coating, PTFE, Halar, Stellite etc.
Tagging
Wake frequency calculation

Ordering code

Model   FT 3080          
             
"U" length in mm       
"X" length in mm       
Flange size       
Flange rating       
Flange facing (RF, RTJ, etc.)       
FT 3080 Flanged thermowell - stepped
Top