test topfoto red-flame test topfoto test topfoto Rafinaderij thermokoppel
  •  

    CMC-141 Multicon Panel Mount Recorder Controller 144x144mm

    The Multicon CMC are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. e.g. 16 RTD ot 31 TC signals. MultiCon CMC-141 is CMC-99's bigger brother. It has all features included in CMC-99, but in addition it has a bigger display, more inputs/outputs and even more logic channels. Casing depth is still only 100 mm. Thanks to that it is one of the first industrial devices which integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. Based on Linux firmware, is stable and the touch screen makes configuration easy and comfortable and data presentation also readable and attractive. Although the Multicon CMC-141 is build in a quite small housing, it can integrate up to 72 inputs, and its construction allows user almost free configuration by choosing up to 3 from 30 available input/output modules. The device can simultanously record all build-in logical channels, and is capable to record data with maximum speed 10Hz (ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over 2 months (125 000 000 samples in total!). An operator can download stored data using a USB flash disk or via Ethernet.

    More info
  •  

    E81 All pairs and overall screened thermocouple extension cable -30°C to 85°C

     

    More info
  •  

    CONAX PG Single sensor feedthrough

     

    More info
  •  

    5331A Universal temperature transmitter

     

    More info
  •  

    Calibration Bath LCA50, Range +30°C to +225°C

     

    More info

Products

 

Thermocouple Hot Junction

 Thermocouple hot junction styles

gesoleerde_warme_las___insulated_hot_junction

 

The thermocouple junction is fully insulated from the welded sheath end. The ungrounded junction is excellent for applications where stray EMF’s can affect the reading and for frequent or rapid temperature cycling. Response time is longer than for a grounded junction. 
 geaarde_warme_las___grounded_hot_junction
 
The sheath and conductors are welded together, forming a completely sealed integral junction. Recommended in the presence of liquids, moisture, gas or high pressure. The wire is protected from corrosive or erosive conditions. Response time with this style approaches that of the exposed junction. 
 
duplex_gesoleerde_warme_las___duplex_insulated_hot_junction
Two separate thermocouples are encased in a single sheath. The isolation would prevent ground loop errors if wired to separate instruments. Available with grounded or ungrounded junction.  
opengewerkte_warme_las___exposed_hot_junction
Thermocouple wires are welded to form a junction. Mineral insulated cable is sealed against liquid or gas penetration. This junction style provides the fastest possible response time but leaves the thermocouple wires unprotected against corrosive or mechanical damage. 
swaged_thermocouple_verjongde_warme_las_verjngte_messstelle
Swaged thermocouple tip for fast response and sturdy probe design sealed against liquid or gas penetration. This junction style provides fast response time and at the same time a fully insulated and protected hot junction.