Rafinaderij thermokoppel test topfoto test topfoto red-flame test topfoto
  •  

    CMC-141 Multicon Panel Mount Recorder Controller 144x144mm

    The Multicon CMC are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. e.g. 16 RTD ot 31 TC signals. MultiCon CMC-141 is CMC-99's bigger brother. It has all features included in CMC-99, but in addition it has a bigger display, more inputs/outputs and even more logic channels. Casing depth is still only 100 mm. Thanks to that it is one of the first industrial devices which integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. Based on Linux firmware, is stable and the touch screen makes configuration easy and comfortable and data presentation also readable and attractive. Although the Multicon CMC-141 is build in a quite small housing, it can integrate up to 72 inputs, and its construction allows user almost free configuration by choosing up to 3 from 30 available input/output modules. The device can simultanously record all build-in logical channels, and is capable to record data with maximum speed 10Hz (ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over 2 months (125 000 000 samples in total!). An operator can download stored data using a USB flash disk or via Ethernet.

    More info
  •  

    5331A Universal temperature transmitter

     

    More info
  •  

    E81 All pairs and overall screened thermocouple extension cable -30°C to 85°C

     

    More info
  •  

    CONAX PG Single sensor feedthrough

     

    More info
  •  

    Calibration Bath LCA50, Range +30°C to +225°C

     

    More info

Products

 

Suction Pyrometers

 

Suction Pyrometers

Suction pyrometers consist of a combination of a thermocouple and a suction probe for gas samples, with which the temperature of the extracted gas flow can be measured. The fuel gas/flue gas is sucked to the tip of the suction pyrometer, and passes a type B thermocouple. This increases the heat transfer coefficient through forced convection, thereby improving the responsiveness of the temperature measurement. The thermocouple is shielded by a three layered ceramic radiation shield, to block unwanted influences through radiation. The pyrometer also has a water cooling system for the lance. The attainable exactitude with this measurement lies at a deviation of only a fe degrees. With this measurement method, local flame temperatures of up to 1800°C can be determined. Both IFRF and VDE versions are possible. Please contact us for detailed information.