test topfoto red-flame Rafinaderij thermokoppel test topfoto test topfoto
  •  

    5331A Universal temperature transmitter

     

    More info
  •  

    E81 All pairs and overall screened thermocouple extension cable -30°C to 85°C

     

    More info
  •  

    Calibration Bath LCA50, Range +30°C to +225°C

     

    More info
  •  

    CONAX PG Single sensor feedthrough

     

    More info
  •  

    CMC-141 Multicon Panel Mount Recorder Controller 144x144mm

    The Multicon CMC are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. e.g. 16 RTD ot 31 TC signals. MultiCon CMC-141 is CMC-99's bigger brother. It has all features included in CMC-99, but in addition it has a bigger display, more inputs/outputs and even more logic channels. Casing depth is still only 100 mm. Thanks to that it is one of the first industrial devices which integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. Based on Linux firmware, is stable and the touch screen makes configuration easy and comfortable and data presentation also readable and attractive. Although the Multicon CMC-141 is build in a quite small housing, it can integrate up to 72 inputs, and its construction allows user almost free configuration by choosing up to 3 from 30 available input/output modules. The device can simultanously record all build-in logical channels, and is capable to record data with maximum speed 10Hz (ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over 2 months (125 000 000 samples in total!). An operator can download stored data using a USB flash disk or via Ethernet.

    More info

Products

 

Multipoint temperature sensor assemblies

multi spot thermometer_multipoint_thermocouples_multipoint_pt100_sensors_miniature_multilevel_thermocouples

For industry and laboratory, we manufacture Multipoint temperature sensors to measure at several points over the length of the probe for temperature profiling or hot spot detection. Multipoint thermocouple assemblies / Multipoint RTD sensors up to 12 measuring points possible within 3 mm sheath or 60 measuring points points within 8 mm O.D.
An Industrial reactor a multi spot thermometer can have up to 32 measuring points with replacement of individual sensors on site. Stufenthermoelement is the common German name.
 ATEX Ex Multipoint Multilevel Temperature Sensors ATEX and IECEx certified sensors for use in Gas, zone 0, 1, and 2 with Exi, Exe, Exd, and Dust approval for zone 20, 21 and 22

 Click here for our latest brochure.

Top