red-flame test topfoto test topfoto Rafinaderij thermokoppel test topfoto
  •  

    CONAX PG Single sensor feedthrough

     

    More info
  •  

    CMC-141 Multicon Panel Mount Recorder Controller 144x144mm

    The Multicon CMC are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. e.g. 16 RTD ot 31 TC signals. MultiCon CMC-141 is CMC-99's bigger brother. It has all features included in CMC-99, but in addition it has a bigger display, more inputs/outputs and even more logic channels. Casing depth is still only 100 mm. Thanks to that it is one of the first industrial devices which integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. Based on Linux firmware, is stable and the touch screen makes configuration easy and comfortable and data presentation also readable and attractive. Although the Multicon CMC-141 is build in a quite small housing, it can integrate up to 72 inputs, and its construction allows user almost free configuration by choosing up to 3 from 30 available input/output modules. The device can simultanously record all build-in logical channels, and is capable to record data with maximum speed 10Hz (ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over 2 months (125 000 000 samples in total!). An operator can download stored data using a USB flash disk or via Ethernet.

    More info
  •  

    E81 All pairs and overall screened thermocouple extension cable -30°C to 85°C

     

    More info
  •  

    5331A Universal temperature transmitter

     

    More info
  •  

    Calibration Bath LCA50, Range +30°C to +225°C

     

    More info

Products

 

Calibration service

 

 

Raad voor Accreditatie

                                                             Afbeeldingsresultaat voor BELAC

 

We offer two calibration levels for temperature sensors and measuring equipment


Calibration performed by the Thermo-Electra calibration laboratory
Method: By means of a comparison method the sensor to be measured is compared with RvA certified sensors and read out / registered on certified instrumentation.
Calibrations from -50 ° C to 1200 ° C The Calibration certificate includes:
Calibration results with an indication of the calibration measuring instruments including reference to the calibration laboratory where the standard is calibrated

Calibration performed by an accredited laboratory
We arrange the complete settlement, including pre-check and post-check. Accredited laboratories with which we cooperate are RvA and BELAG certified laboratories.
Calibrations are performed according to RvA or BELAG validated procedures
The certificate issued includes all calibration results

In the Netherlands this accreditation is carried out by the RvA (Dutch Accreditation Council)
In Belgium by BELAC (Belgian Accreditation Body)